Products

Dual Discharge Air Coolers

Dual discharge air coolers are produced in capacities between 1 kW and 61 kW.



Environmentally Friendly

Certificated Products

Energy Saving

Tag: Twin Flow Evaporator,Dual Discharge Air Coolers, Heat Exchangers , Twin Flow Coolers

Share:


Coil Specifications


* Optionally, produced with epoxy coated aluminum fins and stainless steel pipe

  • 1

    High efficiency aluminum fins

  • 2

    4-6-8 mm fin spacings

  • 3

    1/2” diameter copper pipe

  • 4

    Can work with R 404A, R 507A, R407C and R 134A gases

  • 5

    Pressure test with 35-bar

  • 6

    Delivery with positive pressurized nitrogen

  • 6

    HACCP hygiene certificate



Optionally, produced with epoxy coated aluminum fins and stainless steel pipe

* Optionally, manufactured with stainless steel casing

  • 1

    Hot-dip galvanized sheet

  • 2

    Corrosive and permanent electrostatic powder paint (RAL 7047)

  • 3

    Hinged drain tray

  • 4

    Easy to open side covers by sliding lock

  • 5

    Ceiling mounting brackets

* Optionally fans can be equipped with three-phase motors
* The power and current values given in the catalog are nominal values.:

  • 1

    Energy-efficient and silent running fans

  • 2

    The fan motors are equipped with insulation class B or F, protection class IP44 or IP54

E1 type resistance heater is used for 0°C and +5°C room temperature range and these are only mounted in the cooling coil.
E2 type resistance heater is used for below 0°C room temperature and these are mounted in the coil and in the drain tray.

* Optionally, water defrost (WD) can be supplied.

  • 1

    E1: Coil electric defrost only

  • 2

    E2: Coil + drain tray electric defrost