Products

Twin Flow Glycol Evaporators

Our twin flow evaporators which are capable to provide small and middle ranges of cooling capacities are able to respond the demands of commercial and industrial refrigerations.



Environmentally Friendly

Certified Products

Energy Saving

Tag: Twin Flow Glycol Evaporators, Institutional

Share:

Coil Specifications

Twin flow glycol evaporators are produced in capacities between 8 kW and 60 kW.

  • 1

    High efficiency aluminum fins

  • 2

    4-6mm fin spacings

  • 3

    5/8" copper pipe

  • 4

    Operating with Ethylene / Propylene glycol - water mixture

  • 5

    Leakage test with 35-bar

  • 5

    Shipping with pressurized nitrogen

  • *Optionally, produced with epoxy coated aluminum fins and stainless steel pipe.

Casing Features

* Optionally, manufactured with stainless casing

  • 1

    Hot-dip galvanized sheet

  • 1

    Anti-rust and permanent electrostatic powder paint (RAL 7047)

  • 2

    Hinged drain tray,

  • 3

    Easily removed side covers by loosening the connection screw

  • 4

    Ceiling mounting brackets

* Optionally fans can be equipped with three phase motors
* The power and current values given in the catalog are nominal values.

The electrical characteristics of the fans:

  • 1

    Energy-efficient and silent running fans

  • 2

    The fan motors are equipped with insulation class B or F, protection class IP44 or IP54

E1 type heating resistor is used for 0°C and +5°C room temperature range. The resistors are only mounted on the cooling coil.
E2 type heating resistor is used for lower than 0°C room temperature. The resistors are mounted on the coil and on the drain tray.

  • 1

    E1: Coil electrical defrost only

  • 2

    E2: Coil + drain tray electrical defrost


    Heating resistor is used optionally in twin flow glycol evaporators