Products

Standard Type Glycol Evaporators

Glycol evaporators are produced in capacities between 4 kW and 100 kW.



Environmentally Friendly

Certified Products

Energy Saving

Tag: Standard Type Glycol Evaporators, Heat Exchangers

Share:

Coil Specifications

Glycol evaporators are produced in capacities between 4 kW and 100 kW.

  • 1

    High efficiency aluminum fins

  • 2

    4-6-8 mm fin spacings

  • 3

    5/8" copper pipe

  • 4

    Operating with Ethylene / Propylene glycol - water mixture

  • 5

    Leakage test with 35-bar

  • 6

    Shipping with pressurized nitrogen



Optionally, produced with epoxy coated aluminum fins and stainless steel pipe.

* Optionally, manufactured with stainless casing

  • 1

    Hot-dip galvanized sheet

  • 2

    Anti-rust and permanent electrostatic powder paint (RAL 7047)

  • 3

    Hinged drain tray

  • 4

    Easily removed side covers by loosening the connection screw

  • 5

    Ceiling mounting brackets

* Optionally fans can be equipped with three phase motors
* The power and current values given in the catalog are nominal values.:

  • 1

    Energy-efficient and silent running fans

  • 2

    • The fan motors are equipped with insulation class B or F, protection class IP44 or IP54 the electrical characteristics of the fans:

E1 type heating resistor is used for 0°C and +5°C room temperature range. The resistors are only mounted on the cooling coil.
E2 type heating resistor is used for lower than 0°C room temperature. The resistors are mounted on the coil and on the drain tray.

  • 1

    E1: Coil electrical defrost only

  • E2

    E2: Coil + drain tray electrical defrost