Products

Propane Chiller Units

Frigo Block R290 (Propane) Chiller is a fully environment friendly refrigeration unit that uses Propane as a refrigerant. It has been ideally designed for a wide range of applications such as supermarkets and hypermarkets, retail refrigeration, any kind of food production and cold storage.



Enviromentally Friendly

Certificated Products

Energy Saving

Tag: Propane Chiller Units,

Share:

  • 1

    Reciprocating compressor(s) with oil sump heater that is needed for the viscosity level of oil in the compressor.

  • 2

    Air-cooled condenser with copper tubes and aluminium fins with corrugated surface to increase the heat transfer.

  • 3

    Liquid line with shut-off valves, drier, sight glass, solenoid valve and thermostatic expansion valve.

  • 4

    Suction line heat exchanger to reduce refrigerant solubility in oil, also results in capacity and increase COP.

  • 5

    Brazed plate heat exchanger made of AISI 316 as the evaporator to cool the water.

  • 6

    Special gas detector to sense any Propane leakage.

  • 7

    Emergency ventilation fan to be operated in case of a Propane leakage to discharge.

  • 8

    An alarm indicating the emergency case if Propane leakage occurs.

  • 9

    Some equipment are ATEX-certified (hazardous Zone 2, acc. to ATEX 94/9/EC) providing the safety measure in case leak occurs inside the unit that becomes explosive

  • 10

    Units are avaible with multi compressors and multi refrigerant circuits when requested.


  • 1

    It’s working with natural and green refrigerant.

  • 2

    Non-toxicity with zero ODP and very low GWP so that has very low CO2 emission.

  • 3

    It doesn’t depend on a legislation like F-Gas regulation.

  • 4

    It has excellent thermodynamic properties leading to high energy efficiency.

  • 5

    It ensures high COP values.

  • 6

    It can operate in a wide range of temperature.

  • 7

    It requires low amount of refrigerant charge.

  • 8

    It has high quality equipment.

  • 9

    It is designed to ensure for maximum safety.

* Ürün modeline göre değişiklik gösterebilmektedir.

  • 1

    Faz koruma rölesi (Alçak/Yüksek)

  • 2

    Termik/Manyetik Şalter

  • 3

    Kontaktör(trifaze modellerde)

  • 4

    Karter ısıtıcısı

  • 5

    Bakır boru alüminyum lamelli kondanser

  • 6

    Likit tankı

  • 7

    Kurutucu filtre

  • 8

    Gözetleme camı

  • 9

    Likit akış kontrol selonoidi

  • 10

    Servis/Bakım vanası (sıvı hattı üzerinde)

  • 11

    Basınç presostatı (Alçak/Yüksek)

  • 12

    Servis/Bakım vanası (sıvı hattı üzerinde)

  • 13

    Gaz şarj vanası

  • 14

    Çek valf, Yağ filtresi, Yağ ayırıcı, Yağ deposu

  • 15

    Yağ regülatörü

  • 16

    Elektronik fan hız kontrolü (donmuş serilerde)

  • 17

    Donma termostatı, akış kontrol anahtarı