'' Blast Freezing Evaporators / FRIGO BLOCK

Products

Blast Freezing Air Cooler

Our Blast Freezing Air Cooler which are capable to provide wide ranges of cooling capacities are able to respond the demands of industrial refrigerations.



Environmentally Friendly

Certificated Products

Energy Saving

Tag: Blast Freezing Evaporators, Blast Freezing Air Cooler, Environmentally Friendly, Heat Exchangers

Share:

Coil Specifications

Blast Freezing Air Cooler are produced in capacities between 6 kW - 56 kW.

  • 1

    High efficiency aluminum fins

  • 2

    12 mm fin spacings

  • 3

    5/8" copper pipe

  • 4

    Working Capacity with R 404A ve R 507A gases

  • 5

    Pressure test with 35-bar

  • 6

    Delivery with pressurized nitrogen



Optionally, produced with epoxy coated aluminum fins and stainless steel pipe

* Optionally, manufactured with stainless casing

  • 1

    Hot-dip galvanized sheet

  • 2

    Corrosive and permanent electrostatic powder paint (RAL 7047)

  • 3

    Hinged drain tray,

  • 4

    Easily removed side covers by loosening the connection screw

  • 5

    Ceiling mounting brackets

* In blast freezers; 50 Pa in Ø500 fans, 100 Pa in Ø630 fans, external pressure loss has to be considered.
* The power and current values given in the catalog are nominal values.:

  • 1

    Energy-efficient and silent running fans

  • 2

    The fan motors are equipped with insulation class F, protection class IP54

E2 type Resistance Heater is used for below 0°C room temperature. The Resistance Heater is mounted in the coil and in the drain tray.
In blast freezers, E3 type Resistance Heater is used as standard. Also Resistance Heater is mounted on the fan cage together with the cooling coil and the drain tray.

  • 1

    E2: Coil + drain tray electrical defrost

  • 2

    E3: Coil + drain tray + fan ring heating